Kval Edge-SS, Руководство по эксплуатации

Страница: 55 / 152

About Door Job Creation
2-22
KVAL Manual
About the Selected Feature Details Menu (Child Level)
Features are created by adding children to a feature group. All features are specific cuts that can
be made on a door. Feature Types for this line include Rectangle, Circle, Hinge, TeeShape, and
LiteCutout, each with their own parameters and validation requirements.
Note: The example below is the parameter of the Hinge Cut form the previous page.
The example below details the parameters of the hinge cut. Predrill locations
are also included in the example.
Feature Name: Name of The Fea-
ture Under the Group.
Feature Type: Select type of cut:
• Circle
• FaceCircle
• FaceRectangle
• Hinge
• Rectangle
• TeeShape
• Face Profile
• LiteCutout
(
See “About the LiteCutout Feature
Detail (DL-NCD Only)” on page 2-37. )
Door Side: Select Door Side:
• Bottom End
• Top End
• Hinge Edge
• Lock Edge
• Hinge Jamb
• Lock Jamb
Data Table: Parameters of the cut.
Includes Hinge Predrill locations.
Manage Augmentations: Add augmentations
to the created Feature. Augmentations are
created at the factory to ad to common cuts.