VHD5 Rigging Manual ·
VHD5 Top (Pan) Flybar Configuration
Main Tensioning Chain
A high tensile chain is used to apply tension to the system, and spread the weight evenly across the flybar.
This chain is permanently attached to the main (Tilt) flybar and during transport and initial setup , is stored in a chain-bag
located at the rear of the main flybar.
The tensioning chain includes a number of marked tags that correspond to the possible system configurations.
HAZARD!
This chain has been pre-measured to ensure correct tension and angle of the system components. Under no
circumstances must any change be made to the length or attachment method of the chain. Doing so can
create a hazard and will immediately void your warranty.
VHD5 R
igging M
anual ·
VHD5
Top (P
an) F
lybar C
onfigur
ation · M
ain
Tensioning C
hain
9
VHD5 Top (Pan) Flybar Configuration
Another unique feature of the VHD5 flybar system, is the ability to deploy the top pan flybar either parallel or at 90 degrees
to the main tilt flybar. This is simply achieved by pushing the spigot up within its housing to disengage the locking mechanism,
and then rotating the spigot by 90 degrees. This will change the engagement angle between the spigot on the top flybar
and fin on the main flybar, between parallel and right angle. This provides additional versatility for rigging, depending on
what hanging points are available in any given situation.
90° mode
Parallel mode
