VHD5 Rigging Manual · Cabling
The main speaker multi-core cable has a Stainless Steel Cable Grip, which connects to the L-Track on the top VHD8.10
cabinet with a Double Stud L Track clip. This provides a fast and secure method, guaranteeing minimal stress to both
the main cable and breakout.
BREAKOUT SPEAKER CABLE
The breakout speaker cable utilises a 48 pin LK connector breaking out to 4 – Blue LK connectors for the LF, 1 - Yellow
LK connector for the VHD5.0 Mid High, 1 - Black LK connector for the VHD5.1 downfill, and 2 - 5 pin XLR's for the Fly Bar
remote control.
The cable connector colour coding corresponds to the colour of the speaker input panels on the cabinets.
AMPLIFIER RACK CONNECTIONS
Connect the amplifier side of the speaker multi cable to the LK 48 way multi pin panel connector, located on the front
of the VHD5 signal and power distribution unit. Then connect the power. Once connected to the control and
amplification system you will have the option to rotate the fly bar left and right as well as tilt it up and down.
NOTE: If the main flybar is NOT in the parked position at the commencement of the system setup, it may be
necessary to connect the tilt flybar control cable and power on the amplifier rack at the beginning of this
process, in order to place the main flybar in the park position and ensure that the system is hanging vertically
during the setup process.
Cabling
MAIN SPEAKER MULTI-CABLE
The main amplifier output feeds for VHD5 are carried on a 20 metre 48
core Eurocable and are connected from the VHD5 amplifier rack to the
speaker breakout by 48 pin LK Connectors.
VHD5 R
igging M
anual · C
abling
18
