VHD5 Rigging Manual ·
Top 2 VHD8.10 Cabinets
3. Remove the push pins from the main flybar and the top of the upper VHD 8.10. Rotate the silver knobs which will raise
up the rigging arms to fit into the flybar double fin shaped front section. Lock them into the vertical position by replacing
the push pins into hole no 2.
4. The Holes on the rigging arm must be aligned with the bottom rear holes on the flybar fin. Adjust the height
of the flybar assembly if needed, then insert the push pins into the flybar locking points.
VHD5 R
igging M
anual ·
Top 2
VHD8.10 C
abinets
12
Top 2 VHD8.10 Cabinets
1. Remove the transport cover from the first two
VHD8.10 cabinets, and roll the cabinets into position
directly under the flybars.
2. Land the flybar assembly onto the top VHD8.10
cabinet, so that the front section is directly above
the VHD8.10 rigging arms, at the front of the cabinet.
The order of cabinets from the top is;
1. VHD8.10 2. VHD8.10 3. VHD5.0 4. VHD8.10 5. VHD5.1
