KV2 Audio KVV 987 334, Руководство пользователя

Страница: 8 / 38

VHD5000 · Features · Rear panel
Rear Panel
SIGNAL INPUTS, OUTPUTS
1) Main Input / Through Signal Out
This is the main system input connector with associated 'Through Signal Output' connector for sending unprocessed signal
to other devices, such as fills or other VHD5000s. The input impedance is switchable between 10kΩ and 120Ω on the display
panel or remote control, the 120Ω should be selected when the VH5000 is driven from a line driver. Where the VHD5000 is
driven from a standard mixing console output, then the 10kΩ setting should be used.
2) Sub Low Insert Send
Sub Insert send is used when the insert function is active, when Insert is not activated, no signal is present at this output.
Insert function serves for sub and low bands only and does not affect the audio quality of mid and hi band using other
devices. This insert is typically used for master equalization and resonance reduction.
3) Sub Low Insert Return / Ext. Sub In
This Insert Return is combined with Ext. Sub Input. When Insert is activated, this input serves as a low/mid Insert input.
When the External Sub Input is activated this input serves as External Sub Input. Refer to block diagram for more
information.
4) Low Out
Serves as a low-mid signal output for the adjacent VHD5000S amplifier.
5) Fill Out
This serves as a fill signal output, with the possibility of tunable HPF and delay.
6) Sub A / Front Out
Subwoofer A signal output provides processed outputs for feeding various subwoofers. When the cardioid mode is set, it
then serves as an output for the front subwoofer.
7) Sub B / Rear Out
Subwoofer B signal output provides processed outputs for feeding various subwoofers. When the cardioid mode is set, then
it serves as an output for the rear subwoofer.
7
VHD5000 · F
ea
tur
es · Rear panel
THROUGH
OUT
SUB B / REAR
OUT
FILL
OUT
SUB A / FRONT
OUT
AC IN
~
230 VAC, 50/60 Hz
max. 3600 WATTS
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
ON
TO ENSURE PROPER OPERATION ALLOW A MINIMUM OF 6 INCHES
OF CLEARANCE FROM THIS SURFACE AND ADEQUATE VENTILATION.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THIS
PANEL OR ANY ATTACHED COMPONENT.
NO OPERATOR SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
LOW
OUT
RESET
SERIA L NU M BER
OUTPUT MID/HI
ETHERNET INTERNAL OUT
COMMUNICATION
K-NET IN K-NET OUT
LINK ACT
MAIN IN
SEND RETURN SUB LOW
INSERT
EXT SUB IN
1 2 3 4 5 6 7 10 10
11 13 12 9 8