KV2 Audio KVV 987 334, Руководство пользователя

Страница: 23 / 38

VHD5100 · Features · Rear panel
Rear Panel
1 2 3 4 5 6 7 8 9
10
11
22
VHD5100 · F
ea
tur
es · Rear panel
VHD5100 Fill Channel
1) Fill in / Through out
This is the Fill channel input balanced XLR connector with
associated Through Signal Output connector for sending
unprocessed signal to other devices in a system.
2) Subs out
Balanced XLR crossover subs output connectors, used to
connect additional subwoofers. Outputs are active even
when FULL RANGE switch is ON.
3) Level
Input Level adjustment potentiometer that allows the
user to adjust input levels from -10dB to +8dB.
4) Full Range
Switch, selects the amplifier crossover setup, when ON:
full range signal is reproduced by ESR215MkII cabinets,
when OFF: signal is crossed over at 70Hz between
OUTPUT FILL and the Subs out.
5) Sub Level
This is the level control for the External Sub output in the
range -12 to +12 dB.
6) Sub EQ
This switch turns on the Low frequency enhancement
circuitry (ON position) which boosts frequencies around
60Hz to enhance the lowest frequency band.
7) Powercon Power Connectors
The VHD5100 Amplifier uses two connectors per two
channel. Each connector supplies one channel. They
accept standard PowerCon terminated AC Mains cables.
8) Fans
The cooling fans operate continuously while the amplifier
is on. An internal temperature sensor increases the speed
of the fans during high temperature conditions. Air enters
through the front dust filters and exits through the rear.
Be sure to allow adequate air flow to the front of the rack
in which the VHD5100 Amplifier is mounted.
9) Output Fill
Speaker output, accepts a standard AP6 terminated
loudspeaker cable for connecting up to a single
ESR215MkII cabinet.
VHD5100 Downfill Channel
10) Downfill in / Through out
This is the Downfill channel input balanced XLR connector
with associated Through Signal Output connector for
sending unprocessed signal to other devices in a system.
11) Output Downfill
Speaker output, accepts a standard AP6 terminated
loudspeaker cable for connecting up to a single VHD5.1
cabinet.