background image

VHD5.0 A

mplifiers  ·  I

mp

or

tan

t S

af

et

y I

nstr

uc

tions

VHD5.0 Amplifiers

 · 

Important Safety Instructions

 

Important Safety Instructions

Before using your VHD5.0 Amplifiers, be sure to carefully read the applicable items of these operating instructions  

and the safety suggestions. 

  1.  Read all product instructions.
  2.  Keep printed instructions, do not throw away.
  3.  Respect and rewiew all warnings.
  4.  Follow all instructions.
  5.  Do not use this unit near water, in unprotected out door areas or in rain or wet conditions.
  6.  Clean only with dry cloth.
  7.  Do not block any ventilation openings.
  8.  Install in accordance with KV2 Audio's recommended installation instructions.
  9.  Do not install near any heat sources such as heat radiators, heat registers, stoves or other apparatus
 

  that produce heat.

 10.  Do not defeat the safety purpose of the grounding type plug. A grounding type plug has two blades
 

  and a third grounding connector. The third connector is provided for your safety. If the provided plug  

 

  does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

 11.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles.
 

  The AC mains plug or appliance coupler shall remain readily accessible for operation.

 12.  Only use accessories specified by KV2 Audio.
 13.  Install the product only with rigging specified by KV2 Audio, or sold with the loudspeaker.
 14.  Unplug this loudspeaker during lightning storms or when unused for long periods of time.
 15.  Refer all servicing to qualified service personnel. Servicing is required when the loudspeaker has been
 

  damaged in any way, such as when the power-supply cord or plug has been damaged; liquid has been  

 

 

  spilled or objects have fallen into the loudspeaker; rain or moisture has entered the loudspeaker;  

 

  the loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not operate    

   normally.
 16.  Do not remove front or back panels. Removal of the panel will expose hazardous voltages.
 

  There are no user serviceable parts inside and removable may void the warranty.

 17.  An experienced user shall always supervise this professional audio equipment.  

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE PANELS.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. 

WARNING: 

To prevent fire or electric shock, do not expose this equipment to rain or moisture. 

SAFETY SUMMARY
To reduce the risk of electric shock, disconnect the loudspeaker from the AC mains before installing audio cable.
Reconnect the power cord only after making all signal connections. Connect the loudspeaker to a twopole, three- wire
grounding mains receptacle. The receptacle must be connected to a fuse or circuit breaker. Connection to any other
type of receptacle poses a shock hazard and may violate local electrical codes. Do not allow water or any foreign object
to get inside the loudspeaker. Do not put objects containing liquid on or near the unit. To reduce the risk of overheating the 
loudspeaker, avoid exposing it to direct sunlight. Do not install the unit near heat-emitting appliances, such as a room heater 
or stove. This loudspeaker contains potentially hazardous voltages. Do not attempt to disassemble the unit. The unit contains 
no user serviceable parts, repairs should be performed only by factory trained service personnel.

To indicate that caution is necessary when operating the device or control close to where the symbol  

is placed, or to indicate that the current situation needs operator awareness or operator action in order 

to avoid undesirable consequences. 

This device is not suitable for use in places  

where children may be present.

Содержание KVV 987 334







































Отзывы: