KV2 Audio KVV 987 334, Руководство пользователя

Страница: 14 / 38

VHD5000S · Getting started
Rack Mounting
VHD5000S will mount in standard 19" rack systems. Integral rear mounting rack ears are also provided for additional support,
do not rely on fixing and mounting the amplifiers using just the front panel as support. Use eight screws and washers to
mount the amplifier to the equipment rack rails (four for the front and four for the rear).
We recommend using a shock mounted rack for touring use to prolong the life of your VHD5000S amplifiers.
Cooling
The VHD5000S amplifier is cooled with two shock mounted fans, that moves air from front panel through dust filters across
the heatsinks and exhausts through the rear.
Although this unit is simple to operate, improper use can be dangerous. This is a very high-powered device that can put out
high voltages and sizeable currents.
It is important to have an adequate air supply at the front of the amplifier, and enough space around the rear of the amplifier
to allow the cooling air to escape. If the unit is rack mounted, do not use doors or covers on the rear of the rack; the exhaust
air must flow without restriction. If you are using racks with closed backs, use fans on the rear rack panel to ensure an ample
air supply.
AC Requirements
Two PowerCon 32A cables are provided to connect the VHD5000S to a suitable AC power supply.
The PowerCon 32A is a connector without breaking capacity, i.e. the PowerCon should not be connected or disconnected
under load or while it is live.
Always isolate your AC supply before disconnecting the PowerCon connector. The VHD5000S amplifiers features switchable
power supply which automatically adapts for the input voltage in range from 195 to 260V AC.
Remember that if you are connecting both AC cables for the VHD5000S to the same AC power source then you will need
to have double the per channel current available.
AC Input
Current draw with amplifier running
at Average Power (Each Channel)
Current draw with amplifier running
at Peak Power (Each Channel)
200V 15A 25A
230V 13A 24A
250V 12A 23A
13
VHD5000S · G
etting star
ted
To indicate that caution is necessary when operating the device or control close to where the symbol
is placed, or to indicate that the current situation needs operator awareness or operator action in order
to avoid undesirable consequences.
This device is not suitable for use in places
where children may be present.