![Kurzweil X-Pro BG Скачать руководство пользователя страница 52](http://html1.mh-extra.com/html/kurzweil/x-pro-bg/x-pro-bg_getting-started-manual_2011685052.webp)
5-12
Song Mode
6.
Follow the above procedure in steps 4 and 5 to store current values as initial values after changing
any volume, pan, or program parameters.
Note:
Most users will want to store initial values as described above. Advanced users may not want to
store initial values for every track. See the
PC3 Musician’s Guide
,
Chapter 12, Song Mode:The MAIN
Page, Program, Volume, and Pan sections for details on saving an initial value for a single track only.
Part 6 b: Recording Volume Automation
You can also record volume automation. Volume automation is the method of recording a series
of volume event messages that change a track’s
Vol
parameter over the course of the song. This
is useful for fading instruments in or out of a song, or adjusting instrument volumes for only
specific sections of a song.
1.
On the Song mode MAIN page, make sure the
Mode
parameter is set to
Merge
(see below.)
(Also
make sure the
Punch
parameter has been turned off, as in Part 5, step 9, above.)
2.
Press the
Record
button, then press
Play/Pause
.
3.
Select the
Vol
parameter and adjust it with the alpha wheel while the sequencer is recording. Any
changes to the
Vol
parameter will be recorded as data in the current track.
4.
When you are finished, press the
Stop
button. You will be able to review and save your changes just
as in Step 4 of Part 3 (see above.)
Part 6 c: Erasing Volume Automation
If you’ve saved a song with volume automation and you wish to change or remove it
afterwords, follow the steps below to erase a selection of volume automation:
Содержание X-Pro BG
Страница 40: ...4 14 Setup Mode Creating A New Setup...
Страница 70: ...B 4 X Pro Speci cations MIDI Implementation Chart...