![Kurzweil X-Pro BG Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/kurzweil/x-pro-bg/x-pro-bg_getting-started-manual_2011685022.webp)
2-14
Operation Overview
Back Panel
Control Pedals EP1, EP2
You may plug one or two controller pedals (also known as "volume pedals") into these jacks. By
default, EP1 controls Volume, like an organ swell pedal. The function of EP2 varies according to
the program or setup and is often used as a "wah" effect control. The jacks accept Kurzweil
control pedals (model CC-1) and compatibles.
SW Pedal
This connector is for the 3 piano pedals (Soft, Sostenuto, Sustain). There should already be a
cord from the X-Pro pedal assembly plugged into it.
Pro Audio Outputs
These jacks are used to connect to a professional sound or recording system using balanced
signal 1/4" plugs and cables. These jacks provide a strong signal that is immune to electrical
noise. For a monophonic mix of the left and right stereo signals, plug one cable into the jack
marked "Left/Mono Out". For a full stereo signal, plug the left channel cable into that jack and
the right channel cable into the other jack. Plugging into these does not affect the speaker sound.
Audio Out
This pair of jacks is designed to connect to normal audio equipment such as a hi-fi system that
uses cords with RCA plugs. They provide a weaker signal that works better with consumer
equipment. Note that a full stereo signal is provided even if only the Left cable is plugged in.
Audio In
You can use this pair of jacks to connect a signal source, like an external tape player or MP3
player, to your X-Pro and use its powerful system for amplification. The external signal will be
mixed with the X-Pro's own sound.
The X-Pro's Volume control will NOT control the volume of the external source - you must use
its own volume control. The X-Pro's Volume control will control the volume of its own sound
however.
CAUTION: You should turn your X-Pro off while plugging or unplugging cables from the
Audio In jacks. Otherwise you may hear a very loud hum or buzz noise. Turning the volume
down will NOT prevent this.
Digital Out
This jack provides a digital version of the X-Pro's audio signal for direct digital connection into a
studio or computer. The default signal provided by this jack is: AES/EBU Professional coaxial
format; 24 bits; 48KHz sampling rate. Other common sampling rates, such as 44.1KHz and
96KHz are possible.
Refer to the
PC3 Musician's Guide
for instructions.
Sync In
This input jack allows your X-Pro to synchronize its Digital Out signal to a studio system. Refer
to the
PC3 Musician's Guide
for details.
Содержание X-Pro BG
Страница 40: ...4 14 Setup Mode Creating A New Setup...
Страница 70: ...B 4 X Pro Speci cations MIDI Implementation Chart...