Kurzweil X-Pro BG, Руководство по началу работы

Страница: 17 / 72

Operation Overview
Data Entry
2-9
increment. If you turn it rapidly, you’ll jump by several increments. You can also use the Alpha
Wheel to enter names when you’re saving objects.
The Plus/Minus Buttons
These buttons are located just under the Alpha Wheel. The Plus button increases the value of the
currently selected parameter by one, and the Minus button decreases it by one. These buttons
are most useful when you’re scrolling through a short list of values, or when you want to be sure
you’re changing the value by one increment at a time. One press of the
Plus or Minus button
corresponds to one click to the right or left with the Alpha Wheel. These buttons will continue
changing values if pressed and held.
Pressing the Plus and Minus buttons simultaneously will move you through the current list of
values in large chunks instead of one by one. Don’t confuse these buttons with the +/- button on
the alphanumeric pad. That button is used primarily for entering negative numeric values and
switching from uppercase to lowercase letters (and vice versa).
The Alphanumeric Pad
As its name implies, this set of 14 buttons lets you enter numeric values, and to enter names one
character at a time. Depending on where you are, the X-Pro automatically enters letters or
numerals as appropriate (you don’t have to select between alphabetic or numeric entry).
When you’re entering numeric values, press the corresponding numeric buttons, ignoring
decimal places if any (to enter 1.16, for example, press
1 , 1 , 6 , Enter ). The display will reflect
your entries, but the value won’t actually change until you press Enter . Before pressing Enter ,
you can return to the original value by pressing Cancel . Pressing Clear is the same as pressing 0
without pressing Enter .
When entering names, you can use the Left/Right cursor buttons or the
<<<
/
>>>
soft buttons
to move the cursor to the character you want to change. Use the labels under the alphanumeric
buttons as a guide to character entry. Press the corresponding button one or more times to insert
the desired character above the cursor. The
Cancel button is equivalent to the >>> soft button,
and Enter is the same as the OK soft button. The Clear button replaces the currently selected
character with a space. The +/- button toggles between uppercase and lowercase letters or
between entering positive or negative numbers.