Kurzweil X-Pro BG, Руководство по началу работы

Страница: 46 / 72

5-6
Song Mode
Pressing Retry restarts recording from the same point you last started recording from.
Yes saves the song with the performance you just recorded. Whatever was played back when
you pressed PlayNew will be the version of the song saved when you press Yes . The “save as”
dialog will be displayed:
Use the Alpha Wheel, -/+ buttons, or Alphanumeric Pad to choose a free ID# location to save the
song, or choose a used ID# location to overwrite a previously saved song with your new
version.
For this example we will save the song under ID# 1025
(see above
.)
When overwriting a
song file, the “save as” dialog displays “Replace” followed by the name of the file being
replaced. Press
Save to save the song with the current name, or Cancel to return to the previous
screen.
Press Rename if you would like to change the song’s name. This brings you to the
SongMode:name page.
For this example we will rename the song My Song
(see below
.)
For more
detailed instructions, see the PC3 Musician’s Guide: Editing Conventions chapter, “Saving and
Naming” section.
If you decide not to save or rename on the Song: Save Changes page, pressing the
No
soft button
returns you to the Song mode page in which you were last recording. Changes to the current
song are not saved, though the sequencer will remember changes to certain settings from the
MAIN and BIG pages. These settings are Tempo, Merge/Erase Mode, Locate, track mute status,
Time In, Time Out, Song End, Loop, Punch, and Metron. To permanently save these changes
with the song, make sure to choose
Save from the soft button menu before powering off or
loading a new song. Alternatively, you will be prompted to save these changes upon loading a
new song if the MAIN page settings were changed while recording or with recording armed, or
if any of the BIG page settings were changed.