Kurzweil X-Pro BG, Руководство по началу работы

Страница: 51 / 72

Song Mode
5-11
2. Find the desired volume level by adjusting the Vol parameter during playback, then press stop. For
this example, let’s set the Vol parameter to 80 .
3. Use the left and right more soft buttons at the bottom corners of the display to find the MIXER soft
button and press it (see below.) This brings you to the Song:MIXER page.
4. On the Song:MIXER page, press the Keep soft button to store initial values for all tracks (see
below.)
5. On the Song:MIXER page, press the Done soft button or the front panel Exit button. You will be
asked to save changes to your song, just as in Part 3, step 4 of this guide (see above.) Saving your
song completes the process of storing initial volume settings with your song.
Pressing the Keep soft button on the Song:MIXER page stores initial values of volume, pan, and
program number for each track. Initial values are the settings that will be used when your song
is played back from the beginning. Volume, pan, and program settings can change automatically
over the course of the song if you change them while recording, but pressing the
Keep button
stores the current value for each setting to be recalled at the songs beginning.