Introduction
Options
1-2
Options
Ask your Kurzweil dealer about the following PC1 options
:
Sound ROM Cards
The PC1 has a socket for one ROM expansion card that you can install yourself (the expansion kits come with
complete instructions). An expansion card adds 16 megabytes of ROM sounds to the 32 megabytes of
onboard ROM.
Pedals
The PC1 has two pedal jacks for a stereo or mono switch pedal (for functions like sustain or program/setup
changes) and a continuous pedal (for functions like volume control). The switch pedal jack allows two pedals
to be plugged in simultaneously. Your Kurzweil dealer stocks the following optional pedals:
FS-1 Standard box-shaped switch pedal
KFP-1 Single piano-style switch pedal
KFP-2M Double piano-style switch pedal unit
CC-1 Continuous pedal
Ribbon Controller
There’s a dedicated modular jack (like a telephone jack) on the rear panel for connecting this 600-mm (24-
inch) ribbon controller. You can configure the PC1 to use the ribbon as a single large controller, or a three-
section controller with independent settings for each section.
Music Rack
The sturdy acrylic music rack (model PC-MDS) fits into a bracket that you attach to the PC1’s rear panel.
You’ll find installation instructions on page 2-1.
Unpacking your PC1
Your PC1 carton should contain the following:
z
PC1 Performance Controller
z
Power adapter
z
Piano-style switch pedal
z
Four adhesive-backed rubber feet
z
This manual
z
Warranty card
z
CD-ROM
z
Two overlays for orchestral and GM program categories
You might want to keep the PC1 carton and packing materials for easy shipping or transport.
