![Kurzweil KDFX Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/kurzweil/kdfx/kdfx_manual_2011593012.webp)
What is KDFX
KDFX Terms
1-4
FXMode setting
This parameter, which is found on the K2500Õs ÒEffectsÓ Mode page, determines whether the
parameters in a KDFX
Studio
will be controlled internally or externallyÑin other words,
whether
FX Mods
will be active. If it is set to ÒProgramÓ, ÒSetupÓ, or ÒAutoÓ, then as you
change the Program or Setup, a different KDFX Studio will load, and any FXMod links between
that Program or Setup and the Studio will be active. If it is set to ÒMasterÓ, then the KDFX
Studio must be chosen manually, and will not change when the Program or Setup changes, and
FXMods in the current Program or Setup will be not be active.
Studio Editor
The Studio Editor section is accessed in one of two ways, depending on the
FX Mode
setting
. If
FX Mode is ÒMasterÓ, then the Studio Editor is accessed from the ÒEffectsÓ mode page, by
highlighting the current Studio, and pressing Ò
Edit
Ó. If FX Mode is ÒProgramÓ or ÒSetupÓ, then
the Studio Editor is accessed from
within
the Program or Setup Editor, by going to the EditorÕs
KDFX page, highlighting the current Studio, and pressing Ò
Edit
Ó.
The Studio Editor consists of the following pages:
Input
, where signals coming from the K2500Õs four stereo output buses are routed to one or
more FX Buses in KDFX.
FX Bus
, where
FX Preset
s are assigned to the four
FX Bus
es and
Bus
Overrides
are set up.
Aux FX
, where an
FX Preset
is assigned to the
Aux FX Bus
and
Bus
Overrides
are set up.
FXPreset Editor
, which is accessed from the
FX Bus
page and the
Aux FX
page by highlighting
the name of the
FX Preset
and pressing Ò
Edit
Ó. This is where Algorithms are chosen and
Parameters are set for the FX Presets, and where FX Presets are selected, named, and saved.
Output
, where the signals coming from the FX Buses and Aux FX are routed to the K2500Õs
eight physical outputs (analog and digital).
Name, Save, Delete
, and
Dump
, for Þle management of KDFX
Studio
s.
Dependent objects
In KDFX, as in K2500 programs, dependent objects are those software objects which make up
part of larger objects: in a
Studio
, the dependent objects are its
FX Presets
. The Studio itself is
now a dependent object in Programs and Setups.
Internal Effects
The original K2500 effects processor chip is still usable in a KDFX-equipped unit, and functions
essentially the same as it always has, quite independently from KDFX (except that the
FXMode
Setting
applies both to it and to KDFX). When we refer to Internal Effects in this manual, weÕre
talking about that one-in, two-out effects processor.
Содержание KDFX
