3BA00174 • 2014-02-06 • Rev. 5
HR 100 1 / 9
3.
Concerning your safety
In addition to the hierarchically structured warning notes described above, we
use the following symbols:
Used to highlight any texts containing explanations, information or hints.
■
This symbol identifies
- action that is strictly required, or
- instructions that must be strictly complied with.
3.2
Intended use
Thermal tools from Ersa must only be used for the processing of soft solder. However, if
explicitly described in the operating instructions of the respective thermal tool, some thermal
tools may, in exceptional cases, be used for the processing of plastic materials.
In case of unintended use and tampering with the device, any warranty and liability claims of
the buyer against the manufacturer will become null and void.
3.3
Target group of readers
This instruction manual addresses persons with knowledge in the field of reflow soldering.
