3BA00174 • 2014-02-06 • Rev. 5
HR 100 1 / 4
1.
Introduction
We would like to thank you for purchasing this high quality Rework System. With the HR 100A
Ersa offers a microprocessor controlled cutting edge handheld rework system for standard and
lead-free rework applications. It is intended for use in industrial manufacturing, repairs and
laboratory applications.
The combination of radiant and convection heat with contactless transfer to the components,
is characteristic for the hybrid technology. Due to its optimal heat transfer this technology is
most suitable for all SMT-Rework processes.
Three modes of operation enable optimal adaptation to the required purpose of use:
• Time base
• Time base with temperature measurement
• Programmable temperature control (control either through base station or with
IRSoft
via
PC.
An integrated laser pointer facilitates exact positioning of the heat source. With the
straightforward menu guidance settings can be comfortably edited and saved.
A rotary encoder with momentary contact function serves the purpose of programming and
operation.
The extensive range of accessories enables you to set up a flexible and modern Rework-System
for highest quality demands.