44
EN
Basic settings
Initial Settings
After your steam oven is first plugged in or after a
power failure, the clock display will flash to
indicate that the time shown is not correct.
The oven will not operate until the clock, the
water hardness parameter and the Calibration is
set.
To set the clock and the water hardness
parameter value proceed as described in the
following chapters.
Setting the clock
The clock display will flash if your appliance is first plugged in or after a power failure, to indicate that the
time shown is not correct. To set the clock, proceed as follows:
To set the clock, proceed as follows:
1.
Press t
he “On/Off” key
to switch the
oven on.
2.
Press the “Time function” key.
3.
(Step 1 and 2 can be skipped if the device
is connected for the first time, or after a
power failure).
4.
Press the “–” and “+” keys to select the
function.
5.
Press the OK key
, to confirm.
6.
Press the
“-” and “+” keys
to set the
hours.
7.
Press the OK key
to confirm the hours.
The minutes digits will flash.
8.
Press the “-” and “+” keys
to set the
minutes.
9.
Press the OK key
to confirm the
minutes.
Water Hardness setting
The
appliance
features
a
system
that
automatically indicates when it is time to descale.
The system can be optimized for households with
very soft water (also through using a water
softening appliance) and very hard water, by
changing the user settings to the relevant range
of water hardness (see table below).
To set the water hardness parameter, proceed as
follows:
1.
Press the
“On/Off”
key to switch the
oven on.
2.
Press the
“+”
and “OK”
keys
simultaneously. The Water Hardness level
will start to flash on the display.
(Steps 1 and 2 are not necessary if the
oven is first plugged in or after a power
failure.)
3.
Press the
“–” and “+”
keys to select
the desired water hardness according to
the table below.
4.
Press the
“OK”
key
to set the
parameter. The oven returns to the “ON”
state.
