70
H3-72-01
For internal use only
8.2
Demonstration mode (
EKDG 6800.0
and
EKDG 6800.0-75
)
Requirement:
The appliance must be ready for operation before it is switched on or
off, i.e. all of the displays are dark apart from the time of day display.
Switching the appliance on and off
: Keep the OVEN LIGHTING buttons pressedi and then also press the
TIME OF DAY, TIMER, OPERATING TIME and SWITCH-OFF TIME
buttons. The display will show ****Demo mode on*** or ****Demo
mode off*** for 3 seconds. The demonstration mode is stored in
EEPROM so that it will not get lost and will not need to be re-set, even
in the event of a power cut.
If an appliance is connected to the mains with the demonstration mode activated, the display will show
*** Demo mode *** as a reminder. This text can be acknowledged with any button.
8.3
Demonstration mode (
EKDG 6800.1
and
EKDG 6800.2
)
Requirement:
The appliance must be ready for operation before it is switched on or
off, i.e. all of the displays are dark apart from the time of day display.
Switching the appliance on and off:
Keep the LIGHTING and OK and OFF buttons pressed for
10 seconds. The display will show **** demonstration mode off***.
Use the adjusting knob to set ****Demo mode on*** and acknowledge
with the OK button.
Switching off:
Press the LIGHTING and OK and OFF buttons simultaneously. Use
the adjusting knob to set ****Demo mode off*** and acknowledge with
the OK button.
8.4
Demonstration mode (
EEBD 6600.0
)
Requirement:
The appliance must be ready for operation before it is switched on or
off, i.e. all of the displays are dark apart from the time of day display.
Switching the appliance on and off:
Keep the LIGHTING and OK and OFF buttons pressed for
10 seconds. The display will show "dEn0" (demonstration mode off)
Press the OK button and adjust the blinking display with the adjusting
knob to “dEn1" (demonstration mode on)
Acknowledge the setting adjustment with the OK button. Use the OFF
button to exit the adjusting mode.
Switching off:
Press the LIGHTING and OK and OFF buttons simultaneously. The
display will show "dEn1" (demonstration mode on)
Press the OK button and adjust the blinking display with the adjusting
knob to “dEn0" (demonstration mode off)
Acknowledge the setting adjustment with the OK button. Use the OFF
button to exit the adjusting mode.
Содержание EDG 6600.0
