Küppersbusch EDG 6600.0, Руководство по обслуживанию

Страница: 69 / 97

H3-72-01 69
For internal use only
8. General information on operation and the
demonstration mode
Operation: EEBD 6600.0
The operation modes, the oven temperature and the core temperature as well as the duration of cooking
time and various other functions may be selected by touching the respective button once or several
times.
• The symbol for the function selected will light up or blink.
• A proposal will blink in the corresponding display.
• Turning the adjusting knob will change the proposed setting.
• If the adjusting knob is not pressed the appliance will start up automatically approx. 15 seconds
after the last setting was made.
• Other settings or changes can be made at any time.
• The appliance will switch off when the button is touched.
The selected mode can also be started up immediately with the button if you do not wish to wait until the
setting time has lapsed after making the previous setting. You may adjust the appliance settings as you
wish. The procedure for all of the user settings corresponds. The following chart gives an overview of
possible user settings. See the instructions for use relating to the specific models here.
Discontinuing operation
Using the OFF button to discontinue with operation of the appliance will automatically delete the mode
of operation, the oven and the core temperature, operation time and switch-off time and the emptying of
the evaporator will be shown on the clear text display and will be carried out if the water temperature was
cooled down to a specific temperature. At the end of the time-controlled operation the settings such as
operation mode, oven temperature and core temperature will be maintained on standby for 3 minutes
(software) so that it is possible to extend the cooking time as required. Only the hot-air phase will be
extended for the baking like professionals mode. The appliance will automatically be emptied and
switched off when the stand-by time has lapsed.
8.1 Demonstration mode ( EDG 6600.0 and EDG 6600.1 )
Requirement: The appliance must be ready for operation before it is switched on or
off, i.e. all of the displays are dark apart from the time of day display.
Switching the appliance on and off: Keep the OPERATION MODE and OK and OFF buttons pressed for
10 seconds. The display will show "dEn0" (demonstration mode off)
Press the OK button and adjust the blinking display with the adjusting
knob to “dEn1" (demonstration mode on)
Acknowledge the setting adjustment with the OK button. Use the OFF
button to exit the adjusting mode.
Switching off: Press the OPERATING MODE and OK and OFF buttons
simultaneously. The display will show "dEn1" (demonstration mode
on)
Press the OK button and adjust the blinking display with the adjusting
knob to “dEn0" (demonstration mode off)
Acknowledge the setting adjustment with the OK button. Use the OFF
button to exit the adjusting mode.