52
Use at the field
Electronic control
The required number of film wraps must have been set
→
CYC, page 71
> Drive to the bale
Automatic mode
> Push
The entire bale loading, wrapping cycle and bale unloading will be
automatically.
Semi-automatic mode
In case, A2, A4 and A6 are set to 0, every step must be confirmed
manually.
→
Parameter settings, page 71
> Push to activate the programm
> Push to operate the loading arm
> Push to start wrapping
In case the wrapping process is interrupted
> push to restart wrapping
The table must turn with about 30 rpm.
After the last number of film wraps:
> Push to move the table backwards.
The bale will be unloaded.
