Use at the field
51
Joystick control
Automatic mode
> Drive to the bale
> Push the joystick left to lift the bale using the loading arm onto the
table
> Push the joystick right to lower the loading arm completely
> Push the FJ button down and hold it for the pre-set number of table
revelations to start wrapping
The table must turn with maximum 30 rpm.
After the last but one number of film wraps, 3 LED’s in the display will
flash. Than the final wrap is added.
When wrapping is finished, the table automatically moves into the bale
unloading position. The bale will be automatically unloaded,when Tip
Up is set
→
TIP UP, page 63
With hydraulic bale turner [+]
> use the concerning hydraulic tractor valve
> Push the FJ button to move the table into loading position
Manual mode
> Drive to the bale
> Push the joystick left and hold it to lift the bale using the loading
arm onto the table
> Push the joystick right and hold it to lower the loading arm
completely
> Push the FJ button down and hold it for the slow table revelations
to start wrapping
> Push the FJ button down and move the joystick to any direction
and hold it for the required number of table revelations
The table must turn with maximum 30 rpm.
After the last number of film wraps:
> Push the F3 button to move the table automatically into the bale
unloading position
> Push the joystick backward to unload the bale
With hydraulic bale turner [+]
> use the concerning hydraulic tractor valve
> Push the joystick forward to move the table forwards
> Push the FJ button to move the table into loading position
Joystick
FJ
Joystick
FJ
