KUHN KMD112, Дополнительные инструкции

Страница: 14 / 36

Precision Seed Drills
12
KMS208-KMD112
Putting into service
„
Adjusting sound intensity.
Adjusting alarm intensity :
The monitor is off
- Hold the on/off button down for 10 seconds (1)
- To wait until the 2nd beep resounds
all the LED are on in fixed red.
- Release the button.(2)
(the buzzer sounds for 2 seconds).
Changing sound intensity :
- press successively on the on/off button (3)
Each pulse will switch off 1 LED (intensity will fall).
The buzzer will sound for 1 second at its new intensity.
To return to 8 LEDs on when there is only 1:
- give an extra pulse (4)
If you don't press the on/off button for more than 5
seconds, the box automatically quits this adjustment
phase, registering the last adjustment made..
The setting remains in memory even if the power to the
box is switched off.
A single LED remaining on indicates that the
buzzer is only at 20% of its power.
8 LEDs on corresponds to maximum power.