KUHN KMD112, Дополнительные инструкции

Страница: 11 / 36

Putting into service
Precision Seed Drills
KMS208-KMD112
9
„
Detection of cells connected to the box
when switching on
Power on :
the box detects signals from the cells to determine how
many of them are connected
The rows corresponding to connected cells light up for
1.5 second in red (1) then 1.5 seconds in green (2)
This allows the operator to verify that the number of rows
controlled matches the number of rows used for sowing.
The number of rows connected is only detected when
the box is switched on.
If the cell connections and number of rows are changed
during the job, the box must be switched off and on again
to be updated.
On switching on and before sowing, check
that all the cells are detected and match the
seed drill configuration (LEDs on).