Putting into service
Disc mower
GMD3510-FF
33
-
On machine side, attach chain around the pto shaft
support located between the top link yoke.
Intermediate PTO shaft
Friction slip clutch
The intermediate PTO shaft is fitted with a friction slip
clutch.
-
- Uncouple the intermediate PTO shaft from the central
gearbox:
• Place the machine in working position.
• Press vertically on the 2 lugs using a screwdriver to
release the PTO shaft guard.
• Slide the guard along the PTO shaft.
• Uncouple the intermediate PTO shaft from the
central gearbox.
Immediately replace any worn or damaged
guard.
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
Before the machine is put into service and
after a long period of non-use, check the
function of slip clutch to ensure it is not
locked up.
a
b
c
d