Disc mower
40
GMD3510-FF
Instructions for work
$
Instructions for work
1. Putting the machine into work
position
From the transport position:
- Pull the release cord until transport lock is released.
- Pressurize the transport/work position cylinder to
place the mowing unit in working position.
- Lower the machine using the tractor lift linkage H =
550 mm (1’10’’).
The machine is in headland turn position.
- Lower the mowing unit onto the ground using the
mowing unit lift cylinder.
- Shift the mowing unit lift cylinder directional control
valve in float position.
The machine is in working position.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
If the tractor is fitted with a hydraulic valve with
adjustable flow rate, reduce oil flow to limit
pivoting speed.
For tractors not equipped with a floating position,
continue activating valve during 3 to 4 seconds
after the setting into work position is ended.
During work, only use the mowing unit lift
cylinder to place the machine in headland
turn position.
