Disc mower
28
GMD3510-FF
Putting into service
2. Coupling and uncoupling
The machine adapts to tractors fitted with a 3 point
linkage category 2.
Description of coupling elements
- A PTO shaft 1 3/8’’ - 6 splines.
- A check chain.
- A release cord.
- Two hydraulic hoses which control the machine
transport/work position setting.
- A 7-pin electric plug for the electrical signalling
equipment.
Preparing the tractor
The tractor PTO stub must rotate at a speed of 1000 min
-1
.
The tractor must be fitted with a double acting hydraulic
outlet with float position.
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
See section:
- Safety / Safety instructions / Precautions
when driving on public roads.
- Appendix.
The tractor must be fitted with lower link
stabilizers.
M
1
a
b
c
d
T
1
T
2
M
2
