KUHN GMD 55, Руководство по сборке и эксплуатации

Страница: 27 / 44

- 25 -
2) Reduce the forward speed.
3) Make sure the cutting knives can pivot if an obstruction is hit.
In order to work on slopes of more than 10° below
horizontal with the GMD SELECT when equipped
with hydraulic cylinder, remove two bolts (A) (photo
37), lengthen the lift rod (D) and turn the two connecting
plates (C) over as shown in photos 38 and 39.
NEVER OPERATE THE MOWER WITHOUT THE SAFETY CURTAIN IN PLACE. DO
NOT LEAN AGAINST OR STAND ON THE GUARD COVER.
BEFORE STARTING UP THE MACHINE AND DURING WORK, KEEP ALL PERSONS
AND ANIMALS FROM THE DANGER ZONE OF THE MACHINE (RISK OF PROJEC-
TION !).
FOR YOUR SAFETY ONLY PARK THE MACHINE WITH THE CUTTERBAR IN THE HORI-
ZONTAL POSITION.
PARKING THE MACHINE
To park the machine proceed as follows :
- Be sure the cutterbar is in its vertical transport
position.
- Disconnect stop chain on tractor side.
- Pull out the stand (D) and bring it down.
- Unlock the transport rod.
- Lower the cutterbar down to the horizontal position.
- With the hydraulic 3 point lift, lower the machine to
the ground and disconnect the top link, the lower
links and then the hydraulic hose.
- Disconnect the PTO shaft (T), support it with the
stop chain (E) and secure with hook (C) as shown
in photo 40.