KUHN GMD 55, Руководство по сборке и эксплуатации

Страница: 18 / 44

- 16 -
8) Mounting the safety guard and its locking device
- Attach the front safety bar (B) to its hinges (C) with
the cup square bolts (P) (M 10 x 25), self locking
nuts (O) (M 10) and washers (Q) (Ø 11 x 24 x 2) (fig.
15).
- Then attach the pre-assembled front safety bar (B)
at "N" with hexagonal screws (M 12 x 75) and self
locking nuts (M 12) (photo 16). Do not tighten these
screws completely, so that the front safety bar can
still pivot.
- Next attach the rear safety bar (A) with cup square
bolts (P) (M 10 x 25), cup square bolts (V) (M 10 x
50) and self-locking nuts (O) (M 10) (fig. 15). Fit
end-plug (Z) on rear safety bar (A) (photo 16).