- 24 -
LUBRICATION
Grease the following points with SHELL Multi-Purpose grease NLG
I
grade 2 :
-
Once a day
: PTO yoke bearings and drive tubes.
-
Once a week
: The four rotors, pendulum arm, vertical 3-point frame pivot pin, pins (F), fingers of DIGIDRIVE
couplings (I) (fig. 25), the rotating sleeves (E) (photo 25 A), axles (K) (photo 25 A), the four wheel axles (A, photo
18), the four levers (H, photo 18) (page 13) and all other pivoting points of the machine.
-
Once a year
: The four rotor gearboxes (G) (photos 25 and 25 A).
The drive gearbox is filled with SHELL Multi-Purpose grease NLG
I
grade 2 (capacity : 0,8 kg). Check the amount
once a year by removing the rear cover (J) (photo 1 A, page 12).
Lubricate the following points with SHELL OIL :
-
Once a week
: the four wheel position locks, the pendulum arm lock and its wire rope, the hydraulic cylinder
pins.
TO ENSURE TROUBLE FREE OPERATION OF YOUR MACHINE,
WE RECOMMEND SHELL LUBRICANTS
