- 13 -
4) Fitting reflectors (fig. 4)
Attach reflector support (1) to central tubing (2) on
each side of the machine by means of 2 hexagon
screws (3) (M 12 x 35) as shown in fig. 4. Next stick
red reflectors (5) and white reflectors (6) to the end
of supports (1).
5) Fitting frame shield (photo 5)
Attach frame shield (T) to reflector supports (1) using
4 hexagon screws (V) (M 8 x 20), 4 plain washers
(diameter 9 x 18 x 1,5) and 4 self-locking nuts (M 8).
Also attach to box type frame (P) using 1 hexagon
screw (W) (M 8 x 12) and 1 lock washer (M 8).
6) Fitting the wheels (photo 6)
Fit the pre-assembled wheels (G) into their holders
(F). Place a shim washer (
I
) (dia. 35 x 45 x 2.5) on top
of the holder. Then install shim washer (K) (dia. 35 x
50 x 1). Secure in place with retaining ring (H). To
complete the job install protective caps (J).
