KUHN ALTOR 7560, Руководство оператора

Страница: 84 / 96

Silo unloader - Straw spreader - Mixer - Distributor
82
ALTOR 7560
Maintenance and storage
6. Control sections
To guarantee optimum cutting, the edges of the sections
must be kept sharp. Sharpen or replace them as
necessary..
You can also swap sections around in order to use both
cutting edges of each section.
7. Changing oil and checking levels
„ Gearbox
Draining:
- Remove filler plug ((1)).
- Place a container underneath the gearbox.
- Remove drain plug (2).
Filling:
- If necessary replace seal.
- Reinstall draining plug (2).
- Remove level plug (3).
- Fill the housing with a funnel via the upper hole in the
housing.
- Stop filling as soon as the oil comes out of oil level
port.
- Reinstall level plug (3).
- Reinstall filler plug (1).
Be very careful when replacing sections. You
run a very serious risk of cutting yourself
(between the regulating tines and the
sections).
Capacity: 5 L (1.3 gal) of SAE 80W90 Shell
Omala 150 oil.