KUHN ALTOR 7560, Руководство оператора

Страница: 57 / 96

Instructions for work
Silo unloader - Straw spreader - Mixer - Distributor
ALTOR 7560
55
3. Silage unloading
„
Approaching the silo
- Set the hydraulic distributo control to continuous
pumping mode.
- Raise the arm and the hook as far as possible to
ensure good visibility and avoid crushing the heap
following a collision.
- Lower the machine as far as it will go, taking care to
avoid scraping the heel along the ground, then
reverse towards the front of the silo.
- Set the heel of the machine on the ground before
contacting the silage to be unloaded.
For a corridor silo, position the machine slightly on the
bias so as to load as close to the wall as possible.
For a machine equipped with a hydraulic unit,
you must set the gearbox to neutral..
Never attempt to penetrate the silo by
reversing forcefully.