KUHN ALTOR 7560, Руководство оператора

Страница: 53 / 96

Instructions for work
Silo unloader - Straw spreader - Mixer - Distributor
ALTOR 7560
51
$ Instructions for work
1. Preliminary checks
Carry out the following checks before using the machine:
- Check the wheelnuts and tighten them if necessary to
25 daNm (184.39 Lb.ft) daNm.
- Check the tension of the conveyor chain and adjust it
if necessary.
- Check the tension of the bale separator chain.
- Check that the screws and nuts are tightened,
including the ones that fix the tools (knives, conveyor
bars).
When the distribution is finished:
- Grease all moving parts. Use only lubricants
recommended by the manufacturer.
- Check the oil level in the gearbox.
- Check the oil level in the conveyor gearbox.
- Check the oil level in the hydraulic unit and the
cleanliness of the oil filter (optional).
Before placing the machine in working
position:
Check the immediate surroundings before
starting up the machine. Make sure that the
visibility is adequate and that there are no
obstacles in the machine working area.