The emergency stop function does not provide a cool down sequence. Do not use
the emergency stop button to abort current print jobs, as this may lead to damage
of the 3D Printer due to uncontrolled heat accumulation.
Do not use the main switch as an emergency stop button. You risk loosing or
corrupting data.
When the Emergency Stop is triggered, the microcontroller board responsible for the stepper motors,
heaters and sensors is reset immediately and returns to idle state afterwards. Now it is safe to resolve
any problems or defects in the build chamber. The build chamber can then be reactivated via the
Manual Control screen or by starting a print job as usual.
