connections and main switch at the back
No. Description
1 touchscreen
2 power-on button
3 main switch
4 mains socket
5 RJ45 ethernet socket
Unpacking / Setting up
After opening the wooden transport box lid, lift the plywood side frame off the pallet in one
piece.
Cut and remove the packing straps.
Remove wooden panel and foam wrap on top of the machine.
Take out the accessory kit box.
Lift the 3D Printer with two persons onto a sturdy table with a flat surface. Always hold the
machine from beneath the bottom edges.
Installation requirements
The apparatus must not be set up in a surrounding with high formation of dust (e.g.
near woodworks etc.). Ingress of particles into the filament feed system can lead to
intense cleaning efforts due to clogging of the nozzle tips and thus immense non-
productive time.
Make sure that no tablecloth is placed underneath the apparatus to avoid blocking
the ventilation openings in the bottom. Loss of air flow can lead to severe damage by
overheating of the drives.
Pull the blue tape off the front doors (2x top edges, 2x bottom edges)
Pull the blue tape off the print bed cardboard support and carefully remove the cardboard from