manualshive.com logo in svg

Kubota RT105M, Руководство оператора, Страница: 85 / 183

Поделиться
Скачать
Kubota RT105M Скачать руководство пользователя страница 85

Transport - 84

RT105M Operator’s Manual

Haul

10. Lower attachments to trailer bed and turn tractor off. See page 77 for proper shutdown procedures.

11. Attach chains to tractor and attachments where tiedown decals are located. See page 81.

Unload 

1. Lower trailer or ramps.

2. Set parking brake and verify that parking brake indicator is on.

3. Check that ground drive controls are in neutral.

4. Remove chains from tiedowns.

5. Fasten and adjust seat belt.

6. Tilt steering column down.

7. Start tractor. See page 74 for proper start-up procedures.

8. Raise attachments, but keep them low and centered. Check that they are not in float.

9. Release parking brake.

10. Slow engine to low throttle and slowly back unit down trailer or ramps. See “Center Console” on 

page 26 for more information. 

Crushing weight. If load falls or moves it could kill or crush 

you. Stay away.

 To help avoid injury:

•

Attach trailer to tow vehicle before loading or unloading.

•

Load and unload trailer on level ground.

•

Block trailer wheels.

Rollover could kill or crush. Wear seat belt.    

 

275-303

Содержание RT105M
























































































































































































Отзывы:

Нет отзывов