manualshive.com logo in svg

Kubota RT105M, Руководство оператора, Страница: 28 / 183

Поделиться
Скачать
Kubota RT105M Скачать руководство пользователя страница 28

RT105M Operator’s Manual

Controls - 27

Center Console

2. Ground drive foot 

control 

To move tractor, push pedal 
down.

To increase speed in either 
direction, push pedal farther 
from neutral position.

To reduce speed in either 
direction, release pedal 
slightly.

To stop, release pedal. 

To function, ground drive direction 
control must be in forward or reverse. 
See “Ground drive/attachment 
direction/speed control” on page 28.

IMPORTANT: 

With gearbox shift 

control in low to dig, increasing engine 
speed also increases digging chain 
speed.

Pedal should automatically return to 
neutral when released. 

3. Brake pedal 

To stop tractor, press. 

4. Steering column tilt 

control

To adjust tilt, depress lever.

To secure steering column in 
position, release.

Item

Description

Notes

Содержание RT105M
























































































































































































Отзывы:

Нет отзывов