Kubota RT105M, Руководство оператора, Страница: 100 / 183

RT105M Operator’s Manual
Trench - 99
Operate
1. Move attachment speed/direction control to desired speed. DIGGING CHAIN WILL MOVE.
2. Set throttle to full engine speed.
3. Lift trench cleaner, if equipped.
4. Slowly lower digging boom to desired trench depth.
5. Raise backfill blade, if equipped.
6. Release parking brake.
7. If using trench cleaner:
• Use ground drive hand control to move forward about 1’ (30 cm), or until there is enough room for
trench cleaner to enter trench.
• Return ground drive control to neutral to stop forward movement.
• Raise boom slightly, then fully lower trench cleaner to lock it in place.
• Lower boom to desired trench depth.
8. Move ground drive hand control to desired speed. Always start trenching with ground drive speed set
at low. Increase ground drive speed only as soil conditions permit.
9. Operate engine at full throttle when working.
Moving digging teeth can kill. Trench cave-in can
cause you to fall. Stay away.
275-097, 270-6900
To help avoid injury:
• Ensure parking brake is set.
• Allow 3’ (1 m) between digging teeth and obstacle. Machine might jerk when digging starts.
• Keep everyone at least 10’ (3 m) from machine, attachments, and their range of movement.
NOTICE:
• Do not have trench cleaner in working position when starting a trench.
• Do not back up with trench cleaner in working position.
NOTICE:
• Do not make sharp turns. Lower boom to full depth when turning.
• If an object becomes lodged in chain, move attachment speed/direction control to neutral
and raise boom slightly. Reverse chain direction. If object must be removed manually, turn
engine off and set parking brake.
6ft/2m