Kubota K008-5, Руководство по эксплуатации

Страница: 165 / 168

Accessories
W9215-8135-1
163
06/2021

Pull O-ring (6) from the nut to bearing eye (5).

Remove bolts (2) and (3) from the bearing boreholes.

Make sure not to lose the spacers (figure above/8).

Start the engine and raise the arm and/or the boom slightly until
the bucket is exposed.

If a new bucket is not to be attached right away, insert the
O-rings, bolts and spacers into the bearing boreholes and se-
cure them from being lost with the safety pins.
Attaching the bucket

Ensure that the components indicated below are free of dirt and
dust.

Ensure that an O-ring (6) is attached to each bearing eye (5).

Check the O-rings and dust protection seals (7) for damage, re-
place them if necessary.
8
6
5
7
3
1
2
4
8
6
5
7