Kubota K008-5, Руководство по эксплуатации

Страница: 138 / 168

136
W9215-8135-1
06/2021
Maintenance
Filling the engine oil

Open the engine hood (page 112).

Unscrew the oil filler cap (1) and fill engine oil. See the
"Recommended lubricants" section (page 130).
Filling capacity: 2.2 l

Screw in the oil filler cap.

Start the engine. The engine oil pressure indicator should dis-
appear immediately after the engine has started; if not, stop the
engine immediately and contact trained personnel.

Let the engine run for approx. 4 minutes and then stop it. Check
the oil level after 5 minutes.

Pull out the oil dipstick (1) and wipe it with a clean cloth.

Insert the oil dipstick completely and pull it out again. The oil
level should be in the "A" area. If the oil level is too low, add en-
gine oil.

When changing the engine oil, fill engine oil up to the maximum of the "A" area.

Close the engine hood and secure it with a padlock.
Replacing the coolant
Total cooling system capacity: 3.5 l

Open the engine hood (page 112).

Open the radiator cap (1).
When the oil level is too high or too low, the engine might get damaged during operation.
Drain the coolant only when the engine is cold.
1
1
1
STOP