. Take the under-seat upholstery and position it under the seat. Ensure there is adequate
clearance for the seat and controls, and then glue into place.
. Disconnect rear flasher light harness and remove two-post ROPS from machine. Save
fasteners to re-use later.
. Locate the back-hoe seat position retainer on the rear crossmember of the tractor and un-bolt
and remove. Save the fasteners.
. Locate the two bolts in the loader sub-frame shown below and remove. Ensure that the sub-
frame members are properly supported.
June 2021© Kubota BX23S Deluxe ROPS Cab Installation Manual
