. Re-fill tractor with engine coolant.
. Start engine, turn heater on and run engine to purge system of air. Run with radiator cap off
and at higher throttle in order to get thermostat to open and cycle coolant into radiator system.
It will be necessary to top coolant up a few times to properly fill system.
. To ensure a proper weather seal, use a black silicone sealant around all small open cracks
between the cab weather stripping and the tractor components.
. The throttle lever comes very close to the heater. It is necessary to adjust the location of the
idle position so that there more room for your hand. Bend the lever back so idle throttle
position has more clearance to the heater.
June 2021© Kubota BX23S Deluxe ROPS Cab Installation Manual
