manualshive.com logo in svg

Kübler Limes BA1, Руководство пользователя, Страница: 36 / 37

Поделиться
Скачать
Kübler Limes BA1 Скачать руководство пользователя страница 36

Manual

Limes LA10 / BA1
Absolute Magnetic Length Measurement System

8.2 Re-start after Fault Clearance

After the fault clearance:

1. Reset the emergency stop mechanism if necessary

2. Reset the error report at the super-ordinate system if necessary

3. Ensure that there are no persons in the danger area

4. Follow the instructions from chapter 6

WARNING!

Danger of injury through non-conventional fault clearance!

Non-conventional fault clearance can lead to severe injuries and dam-

age of property.

Therefore:

•  Any work to clear the faults may only be performed by sufficiently

qualified staff

• Arrange enough space before starting the works

•  Make sure that the mounting area is clean and tidy. Loose com-

ponents and tools are sources of accidents

If components need to be replaced:

• Pay attention to a correct installation of the spare parts

• Reinstall all the fixing elements properly

•  Before turning on the device, ensure that all covers and safety

equipment is installed correctly and functions properly

9. Maintenance

The device is maintenance-free.

WARNING!

Danger through non-conventional maintenance!

Non-conventional maintenance can lead to severe injuries and dam-

age of property.

Therefore:

Maintenance works may only be completed by staff that has been au-

thorized and trained by the operator.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание Limes BA1






































Отзывы:

Нет отзывов