KTR Kupplungstechnik
GmbH
D-48407 Rheine
RADEX
®
-NC
Operating-/Assembly instructions
KTR-N
sheet:
edition:
47210 EN
2 of18
6
Schutzvermerk
ISO 16016 beachten.
Gezeichnet:
23.05.12Kb
Ersatz für:
KTR-N vom 26.03.09
Geprüft:
23.05.12 Kb
Ersetzt durch:
The RADEX
®
-NC servo laminae coupling is a backlash-free, torsionally stiff and flexible steel
laminae coupling. It has been developed particularly for the ranges of servo technology in
order to meet the demands of high torsional stiffness (e. g. use in indexing tables, planet and
worm gear pairs, ball roll spindles etc.).
Table of Contents
1
Technical Data
2
Hints
2.1 Coupling Selection
2.2 General Hints
2.3 Safety and Advice Hints
2.4 General Hints to Danger
2.5 Proper Use
3
Storage
4
Assembly
4.1 Components of the Couplings
4.2 Hint regarding the Finish Bore
4.3 Assembly of the Hubs
4.4 Displacements - Alignment of the Couplings
4.5 Spares Inventory, Customer Service Addresses
5
Enclosure A
Hints and instructions regarding the use in
hazardous areas
5.1 Use in
Hazardous Areas According to the Regulations
5.2 Control intervals for couplings in
hazardous areas
5.3 Approximate Values of Wear
5.4 Permissible coupling materials in the
hazardous area
5.5
Marking of coupling for the hazardous area
5.6 Starting
5.7 Breakdowns, causes and elimination
5.8 EC Certificate of Conformity according to the EC Standards 94/9/EC
dated 23 March 1994
