KTR Kupplungstechnik
GmbH
D-48407 Rheine
RADEX
®
-NC
Operating-/Assembly instructions
KTR-N
sheet:
edition:
47210 EN
5 of18
6
Schutzvermerk
ISO 16016 beachten.
Gezeichnet:
23.05.12Kb
Ersatz für:
KTR-N vom 26.03.09
Geprüft:
23.05.12 Kb
Ersetzt durch:
2 Hints
2.2 General Hints
Please read through these mounting instructions carefully before you set the coupling into operation.
Please pay special attention to the safety instructions!
The RADEX
®
-NC coupling is suitable and approved for the use in hazardous areas.
When using the coupling in hazardous areas please observe the special hints and instructions
regarding safety in enclosure A.
The mounting instructions are part of your product. Please keep them carefully and close to the coupling.
The copyright for these mounting instructions remains with KTR Kupplungstechnik GmbH.
2.3 Safety and Advice Hints
STOP
D A N G E R !
Danger of injury to persons.
!
C A U T I O N !
Damages on the machine possible.
A T T E N T I O N !
Pointing to important items.
P R E C A U T I O N !
Hints concerning explosion protection.
2.4 General Hints to Danger
STOP
D A N G E R !
With assembly, operation and maintenance of the coupling it has to be made sure that the
entire drive train is secured against unintentional engagement. You can be seriously hurt by
rotating parts. Please make absolutely sure to read through and observe the following
safety instructions.
•
All operations on and with the coupling have to be performed taking into account „safety first“.
•
Please make sure to disengage the drive unit and the power packs in service before you perform your work.
•
Secure the drive unit against unintentional engagement, e.g. by providing hints at the place of engagement or
removing the fuse for current supply.
•
Do not touch the operation area of the coupling as long as it is in operation.
•
Please secure the coupling against unintentional touch. Please arrange for the corresponding protection
devices and caps.
2.5 Proper Use
You may only assemble, operate and maintain the coupling if you
•
carefully read through the mounting instructions and understood them
•
had technical training
•
are authorized to do so by your company
The coupling may only be used in accordance with the technical data (see table 1 to 3 in chapter 1). Unauthorized
modifications on the coupling design are not admissible. We do not take any warranty for resulting damages. To
further develop the product we reserve the right for technical modifications.
The RADEX
®
-NC coupling described in here corresponds to the technical status at the time of printing of these
mounting instructions.
