KTR Kupplungstechnik
GmbH
D-48407 Rheine
NVT-E
Operating-/Assembly Instructions
KTR-N
Sheet:
Edition:
42611 EN
25 of 27
1
Please note protection
mark ISO 16016.
Drawn:
11.10.12 Pz/Wy
Replaced for:
---
Verified:
19.11.12 Pz
Replaced by:
4 Operation
4.9 Diagnostics
4.9.4 Assigning the Switching Output for Recording
In this menu the switching output for recording is selected. Only one switching output can be recorded.
Set recorded output
Set Jornal Out
SJ)ou
Out 1 - Out _
Parameter
out _
►
►
Diagnostics menu
Diagnostic
di A
Range:
to
x
Please note:
The figures are saved from the volatile memory to the nonvolatile memory about
every three hours.
The data saved are overwritten after 6 months.
4.9.5 Delay for Min./Max. Saving (Charging Level)
To record reliable values in case of fluctuating charging level, a delay period to save the minimum and maximum
charging level can be set. Here the period in seconds is set during which the signal must remain continuous
before the charging level is recorded.
Delay storing Min/Max
Delay MM
do)MM
0 - 100
Parameter
___
►
►
Diagnostics menu
Diagnostic
di A
Setting range:
0 .… 100 seconds
Please note:
Open the value journal by pressing the key
.
Set the value via the keys
and
and accept via the key
(e. g. 5 (seconds)).
The device returns to the submenu.
4.9.6 Delay for Min./Max. Saving (Temperature)
To record reliable values in case of fluctuating temperature, a delay period to save the minimum and maximum
temperature can be set. Here the period in seconds is set during which the signal must remain continuous before
the temperature is recorded.
Delay storing Min/Max
Delay MM
dt )MM
0 - 100
Parameter
___
►
►
Diagnostics menu
Diagnostic
di A
Setting range:
0 .… 100 seconds
Please note:
Open the value journal by pressing the key
.
Set the value via the keys
and
and accept via the key
(e. g. 5 (seconds)).
The device returns to the submenu.
