KTR Kupplungstechnik
GmbH
D-48407 Rheine
NVT-E
Operating-/Assembly Instructions
KTR-N
Sheet:
Edition:
42611 EN
17 of 27
1
Please note protection
mark ISO 16016.
Drawn:
11.10.12 Pz/Wy
Replaced for:
---
Verified:
19.11.12 Pz
Replaced by:
4 Operation
4.7 Switching Outputs
4.7.2 Upper Switching Limit (Set Point)
The upper switching limit for switching output OUT 1 is set in the following submenu:
Setting range:
[
] …. [
]
Switching point for OUT x
Please note:
The switching point must be set within the measuring range (see menu
Basic
settings extended functions).
If the function window was assigned to the switching output OUT 1,
is displayed.
The value set corresponds to the upper window limit.
If the function frequency output was assigned to the switching output OUT 1,
is displayed.
The value set corresponds to the frequency 100 Hz.
4.7.3 Lower Switching Limit (Reset Point)
The lower switching limit for switching output OUT 1 is set in the following submenu:
Setting range:
[
] …. [
]
Reset point for OUT 1
Please note:
The reset point must be set within the measuring range.
If the function window was assigned to switching output OUT 1,
is
displayed.
The value set corresponds to the upper window limit.
If the function frequency output was assigned to the switching output OUT 1,
is displayed.
The value set corresponds to the frequency 1 Hz.
