KTR-STOP
®
M-A-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445145 EN
9 of 23
1
Please observe protection
note ISO 16016.
Drawn:
2022-12-20 Ka/Wie
Replacing:
Verified:
2022-12-21 Ka
Replaced by:
Subassembly 7: Pad retraction set fixed side
Compo-
nent
Quantity
Description
Illustration 9: Pad retraction set on fixed side
7.1
1
Cap screw
DIN EN ISO 7379 - 10.9
7.2
1
Pressure spring
7.3
1
Sealing plug
To ensure the full braking power, the preparation for assembly needs to be carefully per-
formed.
•
The connection plate for the brake as well as the brake disk have to be inspected for dimensional accuracy.
For that purpose investigate the connection dimensions, connection surfaces and tolerances as specified in
the drawing (see illustrations 1 to 3 and table 3).
•
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
The connection between connection surface and brake is defined as friction fit. Any resi-
dues of oil, dirt and corrosion protection reduce the coefficient of friction. As a result the
operation of the brake and the full braking power are no longer ensured.
!
Observe the manufacturer’s instructions regarding the use of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
