KTR-STOP
®
M-A-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445145 EN
17 of 23
1
Please observe protection
note ISO 16016.
Drawn:
2022-12-20 Ka/Wie
Replacing:
Verified:
2022-12-21 Ka
Replaced by:
A basic requirement to ensure the readiness for use of the brake is a stock of the most important spare parts on
site.
Contact addresses of the KTR partners for spare parts and orders can be obtained from the KTR homepage at
www.ktr.com.
KTR does not assume any liability or warranty for the use of spare parts and accessories
which are not provided by KTR and for the damages which may incur as a result.
In respect of environmental protection we would ask you to dispose of the products on termination of their service
life in accordance with the legal regulations resp. standards that apply.
•
Metal resp. brake pads
Brake pads and any other metal parts have to be cleaned and disposed of by scrap metal.
•
Gaskets
Gaskets can be disposed of by residual waste.
•
Sensors
Electric components have to be treated as electric waste.
•
Hydraulic oil
Hydraulic oils have to be collected in suitable tanks and disposed of by a waste disposal company.
Brake pads having a balance of pad height of less than 2 mm have to be replaced by return.
!
Make sure that the entire brake system is depressurized.
S T O P
Parts released or falling down may cause injury to persons or damage on the machine.
Secure the components before disassembly.
!
Never keep your fingers between brake disk and brake when applying the brake in order to
prevent serious injuries of your hands. Before every maintenance operation make sure that
the brake is fully secured against activating.
•
Disassemble the pad holders on one side (component 1.3 and 1.4).
•
Remove the pad retraction sets (component 5 and 7).
•
Replace the brake pads that have worn off. Insert the brake pads (component 6) fully into the brake caliper or
the distance plate, respectively.
•
Applying for the moveable side only:
Push back the brake pad and brake piston manually.
4
Assembly
4.11 Spares inventory, customer service addresses
4.12 Disposal
5
Maintenance
5.1 Replacement of brake pads
